Humming but not moving, clicking, or nothing at all when you turn the key? Motor and control faults diagnosed and repaired across Yorkshire — with the common parts already on the van.
Motor Or Something Else?
A shutter that won't run electrically gets blamed on the motor far more often than the motor deserves. A blown capacitor, a failed control box, a worn key switch or limits that have drifted will all produce exactly the same symptoms — and all cost a fraction of a motor replacement.
Our engineers test the supply, the control gear and the capacitor before touching the motor, so you're not paying for a part that wasn't the problem. When the motor genuinely has gone, we say so and replace it properly, sizing it correctly for the weight of your curtain rather than fitting whatever is nearest.
Usually a failed capacitor or a seized brake — often the cheapest fix on the list.
Check the breaker first, then the control box, key switch and wiring before the motor.
Limit switches out of adjustment, or the motor cutting out on overload from a binding curtain.
A clear pointer to an electrical fault rather than anything mechanical.

Motor Work
From a ten-minute capacitor swap to a full motor and control gear replacement on a heavy industrial door.
Failed tubular and side-mounted motors replaced and correctly sized to the weight of your shutter, on systems from any manufacturer.
Capacitors, control boxes, key switches, remotes and safety edges tested and replaced — usually the same visit.
Shutters stopping short or over-running reset to the correct open and closed limits, and checked through a full cycle.
If the shutter is stuck open and the premises are exposed, ring 07492 737 695. We secure the building first, then deal with the motor.
Call Now — 07492 737 695Motor FAQ
Motor Enquiries
Describe the symptom — humming, clicking, dead, stopping part-way — and we can usually narrow the fault down before an engineer sets off.
07492 737 695